Contact Us
Products
Temperature Transmitters
Temperature Sensors
Fiber Optic Sensor Systems
Thermocouple/Extension Wire
Temperature and Process Controllers
Moly and Tantalum Products
Technical Resources
Comparison of Temperature Sensors & Response TimesProperties of Refractory & Ceramic MaterialsRefractory Metal Resistance to Corrosive Materials - GuideThermocouple Alloy - Use & CharacteristicsTemperature Conversion Chart - Melting Points of MetalsA ultra fast thermocouple used to measure: squibs, ignitors, propellants, and rocket nozzlesNanmac High Performance ThermocouplesThermocouples and Extension Grade WireLeading Cause of Errors in Temperature MeasurementThermocouple Standards & CalibrationsThermocouples in Furnaces & OvensSelecting the Right ThermocoupleMold temperature and heat flux measurements during the production of glass containersCare & Use of Nanmac Eroding ThermocouplesNanmac Short Form Article on Using ASTM StandardsWhen Thermocouples Fail
Heavy Duty Head Mount Indicators
with 4-20 mAmp Transmitter Installed
F7_LCD_Series
The F7-LCD-SP indicator is a heavy-duty LCD indicato installed within a NEMA 4 housing and includes an isolated, EX rated temperature transmitter with 4-20 mAmp o put.
Designed for field mounting, it utilizes a rugged, IP66 / NEMA 4 splash proof ho using.
All programming the installed temperature transmitter is done at the facto The user simply connects the required loop power (see F11-50 for full specifications).
The actual transmitter used for this requirement is the F11-50 series, except it has EX rating. Temperature ranges and input loop power requirements are the same. For general use requirements that do not need isolated inputs, EX rating and NEMA enclosures, please see the F7-LCD device.
| General Specifications | |
|---|---|
| Conduit_Connection | 3/4 NPT, top and bottom |
| Mounting | Wall mount or NPT connection |
| Material | Cast aluminum, powder-coat epoxy paint |
User Specified information programmed by Nanmac)
- Input Sensor Type
- Cold Junction (Tc only, default is 32’F / 0”C
- Temperature Scale F or C
- Temperature Range (full sensor range as default
- Sensor Break Delection (upscale or downscale - default is upscale
| Indicator Specifications | |
|---|---|
| Display | Black LCD w/4 digits including (-) sign |
| Dight Height | — 0.5 inch (12mm) |
| Range | Any range between (-) 1999 to 9999, 0 to 3 decimals |
| Under / Over Range Indicator | Flashing Lo/Hi |
| Reponse Time | Approximately 0.5s |
| Ambient operating temperature | -25 to + 70 C / -13 to + 160 F |
| Accuracy | +/-0.05% full scale +/- 1 digital, typical |
| Protection | IP g6 / NEMA 4 |
| Wiring Connection | Stranded, < 16 AWG |
© 2024 Nanmac Corporation
